#### Contents of the preconfiguration file (for &releasename;) ### Localization # Locale sets language and country. d-i debian-installer/locale string es_AR.UTF-8 # Keyboard selection. # Disable automatic (interactive) keymap detection. d-i console-setup/ask_detect boolean false #d-i console-setup/modelcode string pc105 d-i console-setup/layoutcode string es # To select a variant of the selected layout (if you leave this out, the # basic form of the layout will be used): #d-i console-setup/variantcode string dvorak ### Network configuration # netcfg will choose an interface that has link if possible. This makes it # skip displaying a list if there is more than one interface. d-i netcfg/choose_interface select auto # To pick a particular interface instead: #d-i netcfg/choose_interface select eth1 # If you have a slow dhcp server and the installer times out waiting for # it, this might be useful. #d-i netcfg/dhcp_timeout string 60 # If you prefer to configure the network manually, uncomment this line and # the static network configuration below. #d-i netcfg/disable_dhcp boolean true # If you want the preconfiguration file to work on systems both with and # without a dhcp server, uncomment these lines and the static network # configuration below. #d-i netcfg/dhcp_failed note #d-i netcfg/dhcp_options select Configure network manually # Static network configuration. #d-i netcfg/get_nameservers string 192.168.1.1 #d-i netcfg/get_ipaddress string 192.168.1.42 #d-i netcfg/get_netmask string 255.255.255.0 #d-i netcfg/get_gateway string 192.168.1.1 #d-i netcfg/confirm_static boolean true # Any hostname and domain names assigned from dhcp take precedence over # values set here. However, setting the values still prevents the questions # from being shown, even if values come from dhcp. d-i netcfg/get_hostname string unassigned-hostname d-i netcfg/get_domain string unassigned-domain # Disable that annoying WEP key dialog. d-i netcfg/wireless_wep string # The wacky dhcp hostname that some ISPs use as a password of sorts. #d-i netcfg/dhcp_hostname string radish # If non-free firmware is needed for the network or other hardware, you can # configure the installer to always try to load it, without prompting. Or # change to false to disable asking. #d-i hw-detect/load_firmware boolean true ### Mirror settings d-i mirror/country string enter information manually d-i mirror/http/hostname string debproxy-ubuntu:3142 d-i mirror/http/directory string /archive.ubuntu.com/ubuntu d-i mirror/http/proxy string # Suite to install. #d-i mirror/suite string dapper #d-i mirror/suite string hardy # If you select ftp, the mirror/country string does not need to be set. #d-i mirror/protocol string ftp #d-i mirror/country string manual #d-i mirror/http/hostname string http.us.debian.org #d-i mirror/http/directory string /ubuntu #d-i mirror/http/proxy string # Alternatively: by default, the installer uses CC.archive.ubuntu.com where # CC is the ISO-3166-2 code for the selected country. You can preseed this # so that it does so without asking. #d-i mirror/http/mirror select CC.archive.ubuntu.com # Suite to install. #d-i mirror/suite string &releasename; # Suite to use for loading installer components (optional). #d-i mirror/udeb/suite string &releasename; # Components to use for loading installer components (optional). #d-i mirror/udeb/components multiselect main, restricted ### Clock and time zone setup # Controls whether or not the hardware clock is set to UTC. d-i clock-setup/utc boolean true # You may set this to any valid setting for $TZ; see the contents of # /usr/share/zoneinfo/ for valid values. d-i time/zone string America/Buenos_Aires # Controls whether to use NTP to set the clock during the install d-i clock-setup/ntp boolean true # NTP server to use. The default is almost always fine here. #d-i clock-setup/ntp-server string ntp.example.com ### Partitioning # If the system has free space you can choose to only partition that space. # Alternatives: custom, some_device, some_device_crypto, some_device_lvm. #d-i partman-auto/init_automatically_partition select biggest_free # Alternatively, you can specify a disk to partition. The device name must # be given in traditional non-devfs format. # Note: A disk must be specified, unless the system has only one disk. # For example, to use the first SCSI/SATA hard disk: ##d-i partman-auto/disk string /dev/sdb # In addition, you'll need to specify the method to use. # The presently available methods are: "regular", "lvm" and "crypto" ##d-i partman-auto/method string lvm # If one of the disks that are going to be automatically partitioned # contains an old LVM configuration, the user will normally receive a # warning. This can be preseeded away... ##d-i partman-lvm/device_remove_lvm boolean true # The same applies to pre-existing software RAID array: ##d-i partman-md/device_remove_md boolean true # And the same goes for the confirmation to write the lvm partitions. ##d-i partman-lvm/confirm boolean true # For LVM partitioning, you can select how much of the volume group to use # for logical volumes. ##d-i partman-auto-lvm/guided_size string max #d-i partman-auto-lvm/guided_size string 10GB #d-i partman-auto-lvm/guided_size string 50% # You can choose one of the three predefined partitioning recipes: # - atomic: all files in one partition # - home: separate /home partition # - multi: separate /home, /usr, /var, and /tmp partitions ##d-i partman-auto/choose_recipe select atomic # Or provide a recipe of your own... # The recipe format is documented in the file devel/partman-auto-recipe.txt. # If you have a way to get a recipe file into the d-i environment, you can # just point at it. #d-i partman-auto/expert_recipe_file string /hd-media/recipe # If not, you can put an entire recipe into the preconfiguration file in one # (logical) line. This example creates a small /boot partition, suitable # swap, and uses the rest of the space for the root partition: #d-i partman-auto/expert_recipe string \ # boot-root :: \ # 40 50 100 ext3 \ # $primary{ } $bootable{ } \ # method{ format } format{ } \ # use_filesystem{ } filesystem{ ext3 } \ # mountpoint{ /boot } \ # . \ # 500 10000 1000000000 ext3 \ # method{ format } format{ } \ # use_filesystem{ } filesystem{ ext3 } \ # mountpoint{ / } \ # . \ # 64 512 300% linux-swap \ # method{ swap } format{ } \ # . # This makes partman automatically partition without confirmation, provided # that you told it what to do using one of the methods above. ##d-i partman/confirm_write_new_label boolean true ##d-i partman/choose_partition select finish ##d-i partman/confirm boolean true # disk-detect: Serial ATA RAID disk(s) detected. disk-detect disk-detect/activate_dmraid boolean false d-i partman-md/device_remove_md boolean true d-i partman-auto/method string raid d-i partman-auto/disk string /dev/sda /dev/sdb d-i partman-auto/expert_recipe string \ multiraid :: \ 20000 20000 20000 raid \ $primary{ } $bootable{ } method{ raid } \ . \ 8024 8024 8024 raid \ method{ raid } \ . \ 1024 10000 1000000000 raid \ method{ raid } \ . d-i partman-auto-raid/recipe string \ 1 2 0 ext3 / \ /dev/sda1#/dev/sdb1 \ . \ 1 2 0 swap - \ /dev/sda5#/dev/sdb5 \ . \ 1 2 0 ext3 /home \ /dev/sda6#/dev/sdb6 \ . d-i partman-md/confirm boolean true d-i partman/confirm_write_new_label boolean true d-i partman/choose_partition select finish d-i partman/confirm boolean true ### Base system installation # Select the initramfs generator used to generate the initrd for 2.6 kernels. #d-i base-installer/kernel/linux/initramfs-generators string yaird # The kernel image (meta) package to be installed; "none" can be used if no # kernel is to be installed. #d-i base-installer/kernel/image string linux-generic # Always install the server kernel. d-i base-installer/kernel/override-image string linux-server ### Account setup # Skip creation of a root account (normal user account will be able to # use sudo). The default is false; preseed this to true if you want to set # a root password. #d-i passwd/root-login boolean false # Alternatively, to skip creation of a normal user account. #d-i passwd/make-user boolean false # Root password, either in clear text #d-i passwd/root-password password r00tme #d-i passwd/root-password-again password r00tme # or encrypted using an MD5 hash. #d-i passwd/root-password-crypted password [MD5 hash] # To create a normal user account. #d-i passwd/user-fullname string Ubuntu User #d-i passwd/username string ubuntu # Normal user's password, either in clear text #d-i passwd/user-password password insecure #d-i passwd/user-password-again password insecure # or encrypted using an MD5 hash. #d-i passwd/user-password-crypted password [MD5 hash] # Create the first user with the specified UID instead of the default. #d-i passwd/user-uid string 1010 d-i passwd/user-fullname string Administrador d-i passwd/username string sistemas # Normal user's password, either in clear text d-i passwd/user-password password insecure d-i passwd/user-password-again password insecure # The user account will be added to some standard initial groups. To # override that, use this. #d-i passwd/user-default-groups string audio cdrom video # Set to true if you want to encrypt the first user's home directory. d-i user-setup/encrypt-home boolean false ### Apt setup # You can choose to install restricted and universe software, or to install # software from the backports repository. #d-i apt-setup/restricted boolean true #d-i apt-setup/universe boolean true #d-i apt-setup/backports boolean true # Uncomment this if you don't want to use a network mirror. #d-i apt-setup/use_mirror boolean false # Select which update services to use; define the mirrors to be used. # Values shown below are the normal defaults. #d-i apt-setup/services-select multiselect security #d-i apt-setup/security_host string security.ubuntu.com #d-i apt-setup/security_path string /ubuntu d-i apt-setup/security_host string debproxy-ubuntu:3142/security.ubuntu.com # Additional repositories, local[0-9] available #d-i apt-setup/local0/repository string \ # http://local.server/ubuntu &releasename; main #d-i apt-setup/local0/comment string local server # Enable deb-src lines #d-i apt-setup/local0/source boolean true # URL to the public key of the local repository; you must provide a key or # apt will complain about the unauthenticated repository and so the # sources.list line will be left commented out #d-i apt-setup/local0/key string http://local.server/key # By default the installer requires that repositories be authenticated # using a known gpg key. This setting can be used to disable that # authentication. Warning: Insecure, not recommended. #d-i debian-installer/allow_unauthenticated string true ### Package selection tasksel tasksel/first multiselect standard #tasksel tasksel/first multiselect ubuntu-desktop #tasksel tasksel/first multiselect lamp-server, print-server #tasksel tasksel/first multiselect kubuntu-desktop # Individual additional packages to install d-i pkgsel/include string openssh-server screen puppet lsb-release # Whether to upgrade packages after debootstrap. # Allowed values: none, safe-upgrade, full-upgrade #d-i pkgsel/upgrade select none # Language pack selection d-i pkgsel/language-packs multiselect es, en # Policy for applying updates. May be "none" (no automatic updates), # "unattended-upgrades" (install security updates automatically), or # "landscape" (manage system with Landscape). d-i pkgsel/update-policy select none # Some versions of the installer can report back on what software you have # installed, and what software you use. The default is not to report back, # but sending reports helps the project determine what software is most # popular and include it on CDs. #popularity-contest popularity-contest/participate boolean false ### Boot loader installation # Grub is the default boot loader (for x86). If you want lilo installed # instead, uncomment this: #d-i grub-installer/skip boolean true # To also skip installing lilo, and install no bootloader, uncomment this # too: #d-i lilo-installer/skip boolean true # This is fairly safe to set, it makes grub install automatically to the MBR # if no other operating system is detected on the machine. d-i grub-installer/only_debian boolean true # This one makes grub-installer install to the MBR if it also finds some other # OS, which is less safe as it might not be able to boot that other OS. d-i grub-installer/with_other_os boolean true # Alternatively, if you want to install to a location other than the mbr, # uncomment and edit these lines: #d-i grub-installer/only_debian boolean false #d-i grub-installer/with_other_os boolean false #d-i grub-installer/bootdev string (hd0,0) # To install grub to multiple disks: d-i grub-installer/bootdev string (hd0,0) (hd1,0) # Optional password for grub, either in clear text #d-i grub-installer/password password r00tme #d-i grub-installer/password-again password r00tme # or encrypted using an MD5 hash, see grub-md5-crypt(8). #d-i grub-installer/password-crypted password [MD5 hash] ### Finishing up the installation # During installations from serial console, the regular virtual consoles # (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next # line to prevent this. #d-i finish-install/keep-consoles boolean true # Avoid that last message about the install being complete. d-i finish-install/reboot_in_progress note # This will prevent the installer from ejecting the CD during the reboot, # which is useful in some situations. #d-i cdrom-detect/eject boolean false # This is how to make the installer shutdown when finished, but not # reboot into the installed system. #d-i debian-installer/exit/halt boolean true # This will power off the machine instead of just halting it. #d-i debian-installer/exit/poweroff boolean true ### X configuration # X can detect the right driver for some cards, but if you're preseeding, # you override whatever it chooses. Still, vesa will work most places. #xserver-xorg xserver-xorg/config/device/driver select vesa # A caveat with mouse autodetection is that if it fails, X will retry it # over and over. So if it's preseeded to be done, there is a possibility of # an infinite loop if the mouse is not autodetected. #xserver-xorg xserver-xorg/autodetect_mouse boolean true # Monitor autodetection is recommended. xserver-xorg xserver-xorg/autodetect_monitor boolean true # Uncomment if you have an LCD display. #xserver-xorg xserver-xorg/config/monitor/lcd boolean true # X has three configuration paths for the monitor. Here's how to preseed # the "medium" path, which is always available. The "simple" path may not # be available, and the "advanced" path asks too many questions. xserver-xorg xserver-xorg/config/monitor/selection-method \ select medium xserver-xorg xserver-xorg/config/monitor/mode-list \ select 1024x768 @ 60 Hz ### Preseeding other packages # Depending on what software you choose to install, or if things go wrong # during the installation process, it's possible that other questions may # be asked. You can preseed those too, of course. To get a list of every # possible question that could be asked during an install, do an # installation, and then run these commands: # debconf-get-selections --installer > file # debconf-get-selections >> file #### Advanced options ### Running custom commands during the installation # d-i preseeding is inherently not secure. Nothing in the installer checks # for attempts at buffer overflows or other exploits of the values of a # preconfiguration file like this one. Only use preconfiguration files from # trusted locations! To drive that home, and because it's generally useful, # here's a way to run any shell command you'd like inside the installer, # automatically. # This first command is run as early as possible, just after # preseeding is read. #d-i preseed/early_command string anna-install some-udeb # network console sshd :) d-i network-console/password password r00tme d-i network-console/password-again password r00tme d-i preseed/early_command string anna-install network-console d-i anna/choose_modules string network-console # This command is run immediately before the partitioner starts. It may be # useful to apply dynamic partitioner preseeding that depends on the state # of the disks (which may not be visible when preseed/early_command runs). #d-i partman/early_command string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" # This command is run just before the install finishes, but when there is # still a usable /target directory. You can chroot to /target and use it # directly, or use the apt-install and in-target commands to easily install # packages and run commands in the target system. #d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh